Suitcases (suitcases) are a type of luggage. It includes a case body, a telescopic pull rod and a bag bottom wheel, which are widely used because of their ease of use. The suitcase has a long history.
Travel suitcases, from wooden cases for large clothes, large suitcases, to today's portable suitcases and trolleys, are constantly evolving.
1. The suitcase can be divided into soft cloth box and hard box according to the material (hard box can be divided into ABS, PP and ABS+PC and pure PC material);
2. The suitcase can be divided into vertical trolley suitcase and horizontal suitcase according to the structure (the vertical trolley can be divided into four wheels and two wheels);
3, the suitcase can be divided into 13-inch trolley case, 16-inch trolley case, 18-inch suitcase, 20-inch suitcase, 22-inch suitcase, 24-inch suitcase, 26-inch suitcase, 28-inch suitcase 30-inch suitcase and 32-inch trolley case.
1. The vertical suitcase should be upright.
2. The shipping sticker on the suitcase should be removed as soon as possible.
3, when not in use, use a plastic bag to cover the suitcase, so as not to get dust. If the dust accumulated in the surface of the year is infiltrated into the surface fibers, it will be difficult to clean up in the future.
4, depending on the material to determine the cleaning method. If the ABS and PP boxes are dirty, they can be wiped with a damp cloth dampened with a neutral detergent to remove dirt quickly. However, EVA is not applicable. For boxes with EVA boxes, you can use a brush to remove dust. If the stains are enlarged, you can also gently wash them off with oil.
5. The bottom wheel of the box should keep it smooth. When using it, it must be filled with lubricating oil at the axle to prevent rust.
1.When purchasing travel bags, you should purchase products of the appropriate specifications and fabrics according to your personal needs. Most of the hard cases are resistant to high temperature, wear, impact, water and pressure. The hard shell material protects the contents from being crushed and impacted, but the disadvantage is that the built-in capacity is fixed. The soft box is convenient for users to use more space, and most of them are light in weight, strong in toughness and beautiful in appearance, and are more suitable for short trips.
2.Trolley rods, walking wheels and handles are easily damaged when the luggage is used. These parts should be checked during purchase. When the consumer purchases, the length of the drawbar can be selected without pulling over. When the telescopic puller is repeatedly applied for dozens of times, the pullbar is still pulled smoothly, and the pullbar lock is normally switched to verify the quality of the drawbar. When looking at the box wheel, you can put the box upside down, the wheel leaves the ground, use the wheel to make it idling by hand, the wheel should be flexible, the wheel and the axle should not be tight, and the box wheel should be rubberized. Low noise and wear resistance. Most of the handles are plastic parts. Generally, good quality plastics have certain toughness. Poor quality plastics are hard and brittle, and they are prone to breakage during use.
3.When purchasing a travel soft case, first pay attention to whether the zipper is smooth, whether there is missing teeth or misplacement, whether the stitching stitches are straight, the upper and lower lines should be consistent, no empty needles, jump stitches, general box angles, corners Easy to have jumpers. Secondly, it is necessary to see whether there is any disability in the box or the box surface (such as fabric breakage, breakage, splitting, etc.). The inspection methods for accessories such as tie rods, walking wheels and box locks are the same as those for purchasing travel suitcases.
4.Choose well-known businesses and brands. Generally good quality travel bags pay more attention to detail, suitable color matching, neat stitching, uniform stitch length, no wire exposed, smooth and flawless fabric, no bubbling, no exposed edges, and bright metal accessories. Choose well-known merchants and brands with better after-sales protection.
5.View the label identification. Products produced by regular manufacturers shall be marked with the product name, product standard number, specification model, material, production unit name and address, inspection mark, and telephone number.